mlucitt's latest activity

Blaze, you "could" share a link for those of us that are not so good at searching the videos on You Tube...

I don't know the cost of a Rolls SX95, it seems very complicated if you just want to bridge two channels of a stereo amp for a single...

Our source for Phase Linear components is: https://www.whiteoakaudio.com/estore.aspx But many of the technicians here carry parts such...

Will they replace it at no charge? I blew a 18" CV Musical Instrument Speaker (likely old age) that was doing duty in an Acoustic 301...

Of course, a side by side test of your upgraded SII 400 and the ML amplifiers will be required.

You can bridge the Phase Linear amplifiers, but you have to do it correctly. The 700B Owner's Manual says to never connect the outputs...

Clipping the Model ONE. I knew if anybody could do it, it would be Lee.

Good catch, I did not see the Cylon meters in that picture. Still a bit slow down here in Florida...

A real shame...also once made in America, now in China or Viet Nam.

Regarding the Capacitor hold down plate. I recommend you flip it over so the notch is closer to the top of the amplifier. I had to do...

Made a little more progress this week. Watts DCP in and wired up, Backplane B- B+ wired in, IEC wired in, Cylon meter wires in. I...

A very rare unit indeed. Phase Linear 7000 Cassette Deck. Same as a Pioneer CT-A1 and introduced after Pioneer took over in 1980. Made...

If I was you... I would upgrade the PL400 first. It is a much simpler amplifier and the upgrade is less costly. You will learn so much...

The later PL400 amps had 8 Fins, started in 1975, I believe. The last Series I PL400 was assembled sometime in 1978.

Does the "D" in DTS mean Delco?