laatsch55's latest activity

Since you are "making" the circuit, not "breaking" it, much less concern. Or do you need to do both under load? As long as it is made...

Had an old Navy shipboard electrician tell me about WWII ships with a DC system. Never try to screw/unscrew a lightbulb while under...

For discharging caps there are plenty of options available. If some kind of a mechanical switch is to be used, the contacts must be...

Thanks for the link Don. I'll figure out the bleeder switch and resistors to keep from smoking the switch. I have a meter for monitoring...

Here's an EBAY link for the switches I used. EBAY link To clarify the listing appears to be the same as what I used. Have to be...

A few things to consider: Ideally, the fins would be facing inside so the fans push air across them. A switched 1:1/10:1 voltage...

Yeah, we already went through the ghetto water heater elements and other cobbled stuff. When a customer comes over and you have shit...

Gotta see if pulling air OUT, or pushing it IN works the best. I have a mini sensor which transmits to the base station the temp n...

I should have shopped around for the switches. I paid Mouser double what they are going for on other sites like Grainger/Zoro etc....

I had some input from a NASA tech (he got fired for being High), but it is loosely based on the info from Lee's schematic in the other...

78s need dedicated cartridges for sure. Generally spherical and high tracking force. I listen to a lot of prog and the ortofon will be...

Here is a typical component list for a PL400 SII full WOPL build, see any of my past builds for examples of this assembly. As...

Welcome!

Awesome! Thanks!! Rough Estimated costs for the full wopl? I just love the abbreviation haha! USD is fine. I'll have some extra...

Yep I'm in the process of decluttering the plan so I can vector-ize it for CAD. I also rewired the regulator board and deleted R404/405