Gepetto's latest activity

Hi John I agree with Eric on that one crimp. Ensure that each crimp has the "diamond grip" ferrule feature is flattened like the other...

Hi John, Power switch appears to have correct wire colors and terminal locations. You confuse me however with the note about -6dB...

Thanks for looking guys. As Y'all say, More eyes the better. Here's one more of the backside, Just in case I missed anything. I'll...

Thank You, Eric It sure helps knowing the little things :D Before you end up having an " OOPs "moment. Thanks Again, Guys. I can't say...

HI Eric The goal here is to use the cap to keep the chassis and DC ground the same from an AC perspective which is what matters to audio...

Adding a resistor creates a DC pathway which invariably leads to ground looping in equipment that has multiple safety grounded pieces of...

That connection of chassis and DC ground is via a coupling capacitor only and carries microamps of current. You can either use the...

You should John, you don't want those funky washers supplied with the barrier strip compromising the connection.

Hi John You can wire in the pots and simply bypass them with the jumper settings on the amp boards and they will take them completely...

Made a little progress on the Model One. Still a lot to do, but I see light at the end of the tunnel, or is it “I hear the music at the...

Welcome Milos

Thanks guys, Here's a few pics of Stage one, Control Board. All Resistors and diodes populated and Welded. :D Board cleaned, Ready to...

jajajaja

Love this one !