20tajk7's latest activity

That's confusing, 440mA & 11A is more realist. I suppose the 10 & 17kA interrupt ratings makes them specific and hard to find.

Nope, the 11 A is an 11 amp fuse and the 44 100 A is the current fuse at 440ma max. even the fluke website has these numbers. And they...

A 100A fuse in the meter ? Are you sure about the marking ? usually for the 10A part it's a 10 or 12A slow blow.

realigning properly is another point I didn't mention (or that I had taken for granted)... anyways, if the head has the simple 2 screws...

Nice audiophile space heater, I would push the air in as it will keep the fan cool.

I had some input from a NASA tech (he got fired for being High), but it is loosely based on the info from Lee's schematic in the other...

Yes it's the back tension belt, when broken the deck will randomly eat tapes. I use Ø27x1.0mm square belt for replacement. The left...

So, I’ve been busy scrubbing filth off this thing. I took the cover off the transport (plate behind the tape) and found the second belt…...

that's corrosion/oxide too... i've seen it more times and I guess certain alloys used to make heads produce that kind of yellow oxide...

@J!m : Here at this post, you can see that same kind of yellow corrosion/oxide on the sendust head of my own Telefunken TC750 which...

Have a variable oscillator running 60hz or so and amplify that with a chip amp to run the synchronous motor in my turntable, should give...

A chip amp??? Fuck that...........