Model ONE Build - S/N 0005 & 0006

[laatsch55]

Yes indeed...

 

[J!m]

Probably loud too.

 

[Hexis22]

#2 in the house...

How did the new case interior hold up on this shipment?

 

[laatsch55]

Day job got in the way. Haven't unpacked it yet..

 

[laatsch55]

I am impressed with the Cabbage Case folks. The area under the heatsinks is now reinforced with PVC or Poly, the belly of the amp sits on the same stuff. Much stiffer foam and the amp is snug when in position and can't really move. The inside of the case looked new after unloading the amp. The outside is getting that respectable Road Warrior look already. I am tickled with the results....I better be for 800.00....

 

[laatsch55]

The rack is getting some tweaks. I am wiring the power directly into the back of the receptacles with a KELVIN CONNECTION. One less variable. Taking my time, rerouting signal and power wires. Cable ties used extensively.
I am now XLR FROM the Oppo to the Rowland, the Rowland to the Ashly, the Ashly to the White Oaks, with just the PL 300 ruining that scheme...

 

[laatsch55]

Two looks even better!!

 

[Hexis22]

I hope they included the knobs after updating the case…

 

[laatsch55]

They Did Eric, they were as good as they said....

 

[Gepetto]

The rack is getting some tweaks. I am wiring the power directly into the back of the receptacles with a KELVIN CONNECTION. One less variable. Taking my time, rerouting signal and power wires. Cable ties used extensively.
I am now XLR FROM the Oppo to the Rowland, the Rowland to the Ashly, the Ashly to the White Oaks, with just the PL 300 ruining that scheme...

Did you take off the transistor covers Lee?

 

[Hexis22]

Did you take off the transistor covers Lee?

No, I missed sending the covers.

 

[laatsch55]

It took some extreme volume on Fear Inoculum to kick the thermoswitches...... very well behaved coming back on....

Definaterly better sound quality than a WOPL'd B.....as loud and clear as I've ever had the k's go....DAYAM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[laatsch55]

Did you take off the transistor covers Lee?

He knew better Joe...

 

[laatsch55]

Randy and a couple other fellers were over, they just left.....wandering off and talkin to themselves....

Much better control of the low end....no flab ..just instataneous get im!!can't say enough about these....God what an amp!!!!




THANKS JOE!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[Gibsonian]

No, I missed sending the covers.

Don’t think the covers will be needed at Lee’s place…..,

 

[laatsch55]

Hookay, 4" 24 DCfans mounted to the heatsinks. 1" aluminum angle. The heatsinks are PRE-DRILLED at the White Oak factory for just this situation. And to underscore Joe's MO.... they are pretty drilled with an 8-32------ TAP DRILL!!!

 

[Vintage 700b]

Very Nice !

 

[Vintage 700b]

Lee,
I see the fans are not wired in yet. Can they be wired direct, powered by the 25va torroid, tripped by the thermostat switches?

 

[Gibsonian]

Hookay, 4" 24 DCfans mounted to the heatsinks. 1" aluminum angle. The heatsinks are PRE-DRILLED at the White Oak factory for just this situation. And to underscore Joe's MO.... they are pretty drilled with an 8-32------ TAP DRILL!!![/QUOTE

The best continuing to improve and not done yet. Yes , fans your friends Lee. Highly recommend!

 

[Gibsonian]

Screwed up that last post