Picked up another 700b for WOPLing

spitfun

Journeyman
Joined
Jul 6, 2023
Messages
55
Location
Allen Park,Michigan
Picked up another 700b and am having it shipped to Eric for the full boogie. The amp has a "dual primary transformer" ,any advantages other than 220v capable?
 
Picked up another 700b and am having it shipped to Eric for the full boogie. The amp has a "dual primary transformer" ,any advantages other than 220v capable?
None except that. If you plan to resell internationally, it may help you move it into that venue.
 
Picked up another 700b and am having it shipped to Eric for the full boogie. The amp has a "dual primary transformer" ,any advantages other than 220v capable?

You can make it dual voltage, just don't switch the voltage while in operation - sparks may fly.
PL700 Voltage Switch 2.jpg

PL700 Voltage Switch 4.jpg
 
Eric got the new amp in today. Missing outputs, drivers and fuses. The guy had a good rating on Ebay and said he would pack well-one layer of bubble wrap,but he did put it in 2 boxes! Damaged cover on tranny but Eric does it works fine and meters are good-thank goodness that's all I need from this thing! Beware of vague descriptions like "turns on but no further testing done" ,I believe this guy knew what he was selling-he certainly knew how badly he packed it-buyer beware!!
 

Attachments

  • IMG_7721.jpg
    IMG_7721.jpg
    79.4 KB · Views: 19
  • IMG_7718.jpg
    IMG_7718.jpg
    81.3 KB · Views: 21
  • IMG_7737.jpg
    IMG_7737.jpg
    346.8 KB · Views: 22
  • IMG_7738.jpg
    IMG_7738.jpg
    339.8 KB · Views: 28
  • IMG_7724.jpg
    IMG_7724.jpg
    84 KB · Views: 25
  • IMG_7733.jpg
    IMG_7733.jpg
    835.2 KB · Views: 27
  • IMG_7725(1).jpg
    IMG_7725(1).jpg
    874.6 KB · Views: 24
Last edited:
Eric got the new amp in today. Missing outputs, drivers and fuses. The guy had a good rating on Ebay and said he would pack well-one layer of bubble wrap,but he did put it in 2 boxes! Damaged cover on tranny but Eric does it works fine and meters are good-thank goodness that's all I need from this thing! Beware of vague descriptions like "turns on but no further testing done" ,I believe this guy knew what he was selling-he certainly knew how badly he packed it-buyer beware!!

Some JB weld is good solution to the transformer cover
These heatsinks are made from zinc I believe so not to easy to reshape
I did one that I use here at home with good results using the JB weld epoxy
 
My Flavor Country 4 fin got bent because they did a bad job packing it, just a beat up box and packing peanuts. It also had a nice nicotine glaze on it.......
 
Never heard of that. I thought all Phase Linear 240VAC transformers were dual primary (120+120) to get to 240V.
See Note 10 on 700 S2 Schematic:

700%20S2%20Schematic-XL.jpg
 
Someone converted this amp back to 120V from 220V operation and butchered the wiring.

IMG_7760-4K.jpg


The terminal strip had multiple single strand shorts that explain blown fuses.

IMG_7763-4K.jpg
 
Back
Top