Lyle's Phase Linear 700 Ser I, to be WOPL'd

[laatsch55]

Some of you will recognize the 700 as Lee's personal 700 Ser I. Just caught short. Cleaning the chassis of the dreaded white stuff, and there was a bunch. Got the condensate , took it out in the driveway and sprayed away. The white stuff runs off immediately....

Needed something to do till the cabbage case gets back from Phoenix....

 

[laatsch55]

New RCA jacks and speaker posts in...

 

[laatsch55]

AC mains move by the transformer, along with the AC fuseholder.

 

[laatsch55]

New holes drilled for the board standoffs, and standoffs in, holes drilled for the Bias transistors to be moved to the chassis, and with Nav's slick brackets, all mounted up.

 

[laatsch55]

Caps mounted, BABB (bad ass buss bar) fitted, drilled and tapped. The BR will go on the transformer side of said BABB , with the BABB being 1-1/4" X 1/4" plenty of "sink" for the BR.

 

[laatsch55]

The wild roses that were Shpongled remain so, only different. THE SAME plant, two separate colors and now..... The yellow and red are on the same petal!.

 

[laatsch55]

Must have been the "Remix" album this time.....

 

[laatsch55]

The wiring continues at a brisk pace..

 

[Gepetto]

The wiring continues at a brisk pace..

Nice job Lee, I like the socket cap screw on the bridge rectifier.

 

[laatsch55]

Kinda partial to em anyway, that one had a sound mechanical reason for being there, more clearance, I'll post another pic of using them just cause they're cool, especially stainless....

 

[laatsch55]

Totally frivolous.....

 

[Gepetto]

Totally frivolous on my old Dewalt saw as well Lee but I like the SS sockets for serviceability. Looks better than the old slotted screws as well.

 

[Gibsonian]

Overkill is the way to go in these instances. You are smoking right along there Lee.

 

[laatsch55]

Thanks guys. It takes a Hurculean effort after 12 houirs of cleaning up an oil spill to even sit at the bench here lately...

 

[Gepetto]

Thanks guys. It takes a Hurculean effort after 12 houirs of cleaning up an oil spill to even sit at the bench here lately...

Yup we have all had days like that Lee, does not seem to be getting any easier either.

 

[laatsch55]

No, but I am a tough SOB...

 

[laatsch55]

All I could do tonight was gather up Jazz, sit back in the lounger, have kitty cuddles, and stare at the bench.

 

[NavLinear]

No, but I am a tough SOB...

Well - we already knew you're an SOB - no new news there!

I know you're tough - a 300 or 400 pound tire on top of you for how many hours before you got out from under it? That was a scarry story there Lee.

 

[laatsch55]

Seemed like forever Nav, but a couple was probably it. It was getting cold too.

 

[laatsch55]

New zoebel network on the DCP, new shielded on the RCA's. After sleeping most of the day I'm ready to go!!