I may have asked this before...

orange

Veteran and General Yakker
Joined
Jul 6, 2010
Messages
16,621
Tagline
Broken beyond repair but highly affable
#1
Can I use the 4-channel adapter loop on 70s receivers with a Dolby Surround or Prologic 5.1 decoder in this fashion...

I want to take all the other sources and feed the 2-channel audio to the 3300 and route it to the decoder in, out to the rear amp (my small Pioneer receiver I use for an alarm clock) via the rear out jacks (into aux) with no return from the rear receiver.

I have two tape loops so I could switch the audio and video sound and even record the sound/dub between.

I will try that I guess. Seems easier and I can still use the AUX for CD.
 

orange

Veteran and General Yakker
Joined
Jul 6, 2010
Messages
16,621
Tagline
Broken beyond repair but highly affable
#2
All those cable are hell to figure out at that hour...I need to get a spiral notebook and write stuff down anymore.
 
Top