Exactly this monsters. Man i try to push harder and noise come up . I am try a different pl400 series 2 with meter not working on left channel. It's a huge power for to to push hard monster bic dv5312 . My neighbors is came over and said too noise . Hahahahah
I try push hard PL400 this afternoon for about 45 minutes with a 2 cooler fan on the back 8 fin flow to cool down . Suddenly it is make a noise and i can see a meter needle is on middle . I just disconnect speaker cable out and then turn off power amp. Let amp cool down and then i turn it on...
Anyone can help me fix a led meter on my pl400 series 2 ? It is suddenly stop moving on left channel. Sound output is still fine. Hope someone in here can help me out.
I just had an issue with led indicate meter on my pl400 series 2 this morning. The left channel led in dictate just sty on zero but. Right channel is still moving clipping normal. Anyone can help me to fix it ? Many thank
I got an issue with right channel is -66 v and left is -21 mv . Bias value on left is 0.31v and right is 0.35 v . What can i check out on this problem ?
I had been replase a bias pot adjustment . By a mistake i put a B+ and B- cable on negative on filter cap. Some capacitor on pcb dead . I had been replace but something is going wrong so i replace new filter capacitor on but still circuit short somewhere any body here can help me out.
Lee , this is a series 2 version just pick up from garage sale. I had been blow fuse and 1 channel output dead. I just recap and test all transistor and output transistor. I had replace all new output transistor. Only issue is power short .
Had been change all output transistor and I just had this problem . I definitely need help from expert. Here is photo below when I take a measure capacitor filter